What type of gas does my Toro Powerthrow 4 cycle snowblower take?

I know, I should know this. Should I just use the 89 octane stuff?
Thanks in advance.
Thank you very much.

Comments

6 Responses to “What type of gas does my Toro Powerthrow 4 cycle snowblower take?”
  1. Jeffrey S says:
    July 28, 2009 at 1:01 am

    Ok, if your running a 4 STROKE engine, you don’t need to add any oil to the gas, and you should be able to use regular unleaded. If you have a 2 STROKE engine,you would use regular unleaded mixed with the appropriate amount of oil.
    The engine technically has one one engine cycle, with the piston traveling either twice through the cylinder in a cycle for a 2 stroke or 4 times for a 4 stroke.

  2. Bricky Local 9 PA says:
    July 28, 2009 at 1:01 am

    just buy regular unleaded

  3. John Galt says:
    July 28, 2009 at 1:01 am

    regular unleaded.89′s fine.

  4. Michael K says:
    July 28, 2009 at 1:01 am

    does not matter unless you feel the need to spend extramonies on gas…lower octain will work and…. make sure you mix it properly…can cause engine failure

  5. Lance R says:
    July 28, 2009 at 1:01 am

    89 would be fine, but I would use 87 as it is a bit cheaper & it wont hurt the engine

  6. Mr fix it says:
    July 28, 2009 at 1:01 am

    89 is fine as long as your sure its 4 cycle and not 2 cycle.

Leave An Answer

Tell us what you're thinking about this question...
and oh, if you want a pic to show with your comment, go get a gravatar!